Ghost 2 Immobiliser Reviews
The ghost 2 immobiliser is an innovative anti-theft system that uses advanced technology to prevent car theft. The device is hidden by thieves and will only start your engine when an app or PIN code is entered.
It connects to your vehicle's CAN data network and is weatherproof. It features a service/valet function that allows you to temporarily start your car when it is in garage.
Easy to install
The Ghost immobiliser is a cutting-edge security gadget that shields your vehicle from cloning, hacking and key theft. It utilizes a unique PIN code system integrated with the ECU of your vehicle that makes it impossible for thieves to detect or alter. Contrary to traditional immobilisers it doesn't require special keys or sensors, and is completely hidden from view with no LEDs or signals to give away its presence. It is also cheaper than replacing an ECU or installing a new key fob and could lower your monthly insurance premiums.
When installing a Ghost 2 immobiliser, be sure to follow the instructions of the manufacturer carefully. This will ensure that the device is working efficiently and correctly. After the installation is complete Test the system by entering the PIN code and then starting the engine. Regular testing will enable you to detect any issues early on.
Make sure you check the position of the CAN H and CAN L wires prior to starting the installation. They are vital to powering the immobiliser, therefore it is essential that they are properly connected. It is also recommended to label the wires to make it easier to identify them when installing the device. Once you have identified the locations of these wires and connected them to a permanent 12V power source as well as an earthing point. Make sure you use a fuse tap if required to shield the connections from damage or short circuits.
After connecting the wires, tidy the wiring with cable ties to prevent interference. You can also cover the connections using insulation tape or heat-shrink tubing. This will shield them from electrical shorts, and will increase the life span of the device. Once the wiring is secure it's a good idea to test the Ghost 2 immobiliser.
The Ghost 2 immobiliser offers a service mode for situations in which you may have to give your vehicle away like when it is being serviced or parked by a valet. This will disable the PIN sequence temporarily. To activate this feature, press the brake pedal while holding the accelerator, a number of times equal to the first digit of the emergency code. The system will then enter service mode, which can be confirmed by flashing the indication signal five times.
Change PIN codes with ease
It is simple to safeguard your vehicle from theft with a ghost 2 immobiliser. It is concealed within the vehicle and can be accessed using a specific code. The device communicates directly with the vehicle ECU through its data bus, and does not use radio frequency signals, as do traditional Thatcham immobilisers or aftermarket alarm systems. This makes it difficult for thieves to listen for the sound of an immobiliser relay, or to add new key fobs. The control unit is hidden within the vehicle's wiring harness or dashboard, and is not physically accessible to reset the system.
The ghost 2 immobiliser is linked to the vehicle's CAN Data network. It uses buttons on the door panels, the steering wheel and the centre console to create a customisable series of up to twenty button presses that need to be entered to start the engine, just as a PIN code. This unique system is reprogrammable and does not require cutting wires during installation. You can even set your vehicle in Valet or Service mode to allow it to start temporarily while you are giving it to a mechanic to work.
You can also make use of the app to change your PIN code, or deactivate it completely if you have lost your keys. This feature is especially useful in the event that you have offered your car to a third party to be used as a valet or service because it prevents them from starting your vehicle and taking it away without permission. It's also unnoticeable by professional thieves because it doesn't utilize radio frequencies or circuit cuts.
The ability of the immobiliser protect against relay thefts is another excellent feature. Relay theft is a common method of car theft, where the criminals attack the diagnostic port on your car and then alter the original signal sent by the key to the vehicle's ECU in order to trick it into thinking that a valid key is present. The traditional immobiliser can be bypassed in this manner, but with the ghost 2 immobiliser the signal is blocked by the immobiliser before it gets to the ECU.
Simple to use app
Ghost 2 is a revolutionary immobiliser that safeguards your car from key-cloning, hacking, and key theft. It works by connecting to your vehicle's CAN data network and asking you to enter a pin code before it will start the engine. It also prevents thieves from using signal spoofing and device spoofing, which are common tactics used to steal vehicles.
The system is easy to use and works like an auto alarm that is used in a normal way. Installing the system will allow you to create a unique 20-digit pin code that you must enter before starting the vehicle. This will stop the vehicle being stolen even the case that you lose your keys. If you wish to disable the system, you can do so by using an app on your smartphone.
Contrary to other systems it is completely silent and does not emit any radio frequency signals. It is a discrete, weatherproof device that can be placed anywhere inside your car. It can be concealed under the dashboard, steering wheel or door panels. It communicates with your ECU through the CAN data circuit and is not affected by diagnostic tools that some thieves employ to locate security systems. It is also not affected by jamming devices which spoof codes.
It is a hidden installation that does not require any wire cutting or modifications to the vehicle and can be utilized as an anti-theft system for all cars. The technology has been proven effective, and it complies with TASSA Standards. Ghost is a great solution for classic, sports and luxury cars, and it can be used to safeguard vehicles that are let out on websites like Turo.
The Autowatch Ghost 2 is the next generation in car immobilisers. The system is inaccessible to thieves, and prevents them starting your vehicle without your PIN or unless they are authorized by the app. It doesn't emit radio frequencies or any other signals scanners could detect. The process of installing the app is simple and quick. The app is simple to navigate and offers a user-friendly interface which makes it simple to install and use. It also includes an GPS tracker to assist police locate and find the vehicle.
Easy to reset
ghost 2 immobiliser problems is a great way to protect your vehicle from theft. It integrates with your vehicle's ECU to create a barrier that thieves can't breach without the correct PIN. The device is also TASSA certified which means it's recognized by insurance companies. It's a useful device to stop car theft and could save you money in the end.
Unlike traditional alarm/immobilisers that require cutting of circuits, the Ghost system is directly connected to the vehicle's CAN network and operates with the existing buttons on the dashboard as well as the steering wheel. You can create a unique pin that is up 20 presses long. The PIN must be entered before the engine can begin like the credit card PIN. Ghost is unnoticeable to thieves, and there are no LED indicators to make it obvious that it is there and makes it the most efficient aftermarket CAN bus immobiliser that is on the market currently.
Another benefit of the Ghost system is that it doesn't utilize radio frequency signals, which means it is not scannable or intercepted by thieves. This can prevent cloned keys and relay attacks, as well as the more popular method of hacking a car's CAN bus system by looking for signals from the alarm/immobiliser. The Ghost system is designed in a way that it can be hidden inside your vehicle. There aren't any LEDs, or other signals to indicate its presence.
The system also has an option for a Transport Mode that disables the Ghost system which is useful in situations in which you have to temporarily disable it, like during transportation or maintenance. However, this mode is not as effective as Service Mode, as it does not disable the system if your vehicle goes over 31 mph for fifteen minutes.
You will require the emergency code provided by your installer to reset your Ghost 2 immobiliser. The code is typically hidden under the scratch-off area of the card that came with the installation. It is important to keep this emergency code safe and keep it in a place that is secure, like your wallet at home.